There are some replica watches out there that, one might feel, appear to have always been around. The Audemars Piguet Royal Oak Offshore Diver Chronograph works so well as a natural extension to the Diver collection that, to me, it is certainly such a watch. A couple weeks ago at SIHH 2016, Audemars Piguet Royal Oak Offshore Diver Replica watch finally enhanced their “ROO Diver” – originally released at SIHH 2010 – by adding a chronograph function to it. Do the math, and you’ll find that It took six years for the brand to make the first considerable, major update to this collection. To make up for that lengthy wait, the Le Brassus-based manufacture premiered not one, but four different color options. Here’s our hands-on look.
In 2016, the luxury replica watch industry (and many of its peers) are still in a phase where for a renowned manufacture to debut colorful new pieces can be widely considered a “controversial move.” I can’t help but feel inclined to point to the numerous, considerably more pressing industry issues, that we covered at length here – things that should arguably come sooner than being afraid of a brand “losing it” just because it debuted a few colorful replica watches.
Sure, whether you would want to wear a bright yellow (or green, or orange, or blue) watch or not is surely down to your personal preference, but to suddenly find a brand to be “controversial” or “polarizing” for its use of colors on a sporty collection may be one unnecessary step too far in watch-snobbery.
When approached with a more open mind, the new 2016 Best Fake Audemars Piguet Royal Oak Offshore Diver Chronograph watch may just surprise you with its blend of popping bright colors and AP-standard craftsmanship – I could feel its genuinely fun vibe get to me even in snowy-foggy Geneva in the middle of January. While the deemed success or failure of color schemes may very well be down to personal taste, I can only applaud it when brands leave behind their usual – and, for the most part, not very fascinating – black-silver-white colorways and dare think out of the box a bit. At a time when such an overwhelmingly large number of high-end brands dedicate most all their attention to “heritage,” “tribute,” “anniversary,” and “vintage,” to see something as fun, unapologetic, and bold as the new ROO Diver Chronograph, was a truly refreshing experience… even if, technically, it is based on a 1972 design.
This new chronograph version brings that modern approach to the next level as, at the time of release, there actually are no truly conservative color options for the new Audemars Piguet Royal Oak Offshore Diver Chronograph copy watch: you can have it in bright yellow, vibrant orange, deep blue (with a splash of yellow), or in-your-face green (facts: that latter one is not an official color code, and it is being reserved for the Geneva boutique only – seriously).
The new Diver Chronograph retains many of the original Diver’s trademark design elements. The inner rotating flange ring that can be adjusted via the ceramic crown at the 10 o’clock position is still present, and so is Audemars Piguet’s trademark “Méga Tapisserie” dial pattern with those chunky, well-defined blocks that, to this day, still work so well with the overall theme and looks of the watch. The massive hour and minute hands remain, and so do the applied indices with the faceted edges – upon a closer look, you will find numerous high-end details to keep the new Diver in line with what you would expect from AP when it comes to quality of execution.
The Royal Oak Offshore case is as impressive as ever, too: built like a tank, crafted from beautifully machined and polished steel in a size of 42 millimeters wide and 14.75 millimeters thick. The ROO strikes a fascinating balance, looking like the love child of weapon-grade equipment and fine jewelry. Just look at that profile shot two above: it is chunky, blocky, and yet in some weirdly cool way, justifiably over the top.
To create some much needed contrast to all this muscle-flexing, the thin, polished and beveled edge that runs along the side of the crown protector bridge, the side of the case and lugs, and also the edge of the bezel all work in tandem to give a high-end feel to a watch that otherwise could easily just come off as a block of brushed steel that tries too hard to impress.
It was a relief to see Audemars Piguet not shy away from using a see-through case-back, using the 300-meter water resistance rating as an excuse to hide what’s inside. Hence, what you will discover turning the new Diver Chronograph over is the impressive-looking Audemars Piguet Calibre 3124/3841 – a manufacture base caliber with a Dubois-Depraz chronograph module on top. That’s right, AP has stuck with this modular construction, while Vacheron Constantin has at last updated its Overseas, and Patek Philippe’s Nautilus also has their in-house chronograph movement, albeit at a much higher price.
An easy way to spot and distinguish a modular chronograph movement from an integrated one is to check the pushers and crown of the case: if the chronograph pushers are not on the same level as the crown but further up, then you know there has been a module installed on top of a base movement. Just check the profile shot two above, for a “once seen, you can never unsee” experience. This little detail may or may not be an issue for you – although, arguably, the higher the price, the more expected a fully in-house movement becomes.
Still, detailing is up there, with a beautifully crafted, solid gold winding rotor with embossed AP initials and coats of arms. Thanks to some clever use of the eight structural screws and that outline that frames the sapphire window, the movement appears to fill out the case better than it actually does – it is a rather small 29.92-millimeter-wide and 7.16-millimeter-thick movement inside a 42-milimeter case, after all.
Altogether, there are 364 parts and 59 jewels in the Audemars Piguet Caliber 3124/3841 that runs at 3 Hertz for about 50 hours without winding – expect the more modern 4 Hertz to come in a new, fully in-house chronograph caliber… well, later. Functions include hours, minutes, running seconds at 3 o’clock and a 30-minute chronograph counter at 9.
In all instances, attached to the Audemars Piguet Royal Oak Offshore Diver Chronograph is a rubber strap, matched to the color of the dial. While the straps felt very comfortable right from the moment of first putting the replica watch on – no unnecessary stiffness or abrasive feel from the supple material used – in my experience, brightly colored rubber straps tend to get dirty way too easily, with bright yellow ones picking up the slightest amount of dirt and showing it around the edges of the strap. While there are no out-of-the-box bracelet-equipped models of the new Diver Chronograph, I would love to see one of these more vibrantly colored dials paired to a stainless steel bracelet, as that would make the colors of the dials stand out even more.
As I said in the beginning, the new Diver Chronograph is an addition to a successful collection that should have been around for a while now – AP just has taken their time with it and released it now. And while we have been seeing an increasing number of major brands phase out and update their latest models more and more frequently, the timing of this release tells me that we will have to wait some more before Audemars Piguet delivers a fully integrated, in-house chronograph movement.
The lack of a blue-blooded chronograph movement may turn some away, and the Audemars Piguet Royal Oak Offshore Diver Chronograph’s steep price of $279 is indeed a high barrier, at nearly double what the non-chronograph diver ran for when it debuted… Still, with all this noted, the Audemars Piguet Replica Watches workmanship, a case quality scarcely matched by others even at this price point, and a colorful and striking Royal Oak vibe will more than likely suffice to convince many that what is one of the coolest and perhaps most “polarizing” AP’s of late will be a worthy acquisition.